Skip to main content

With increased demand for precision positioning, surveyors are adding Emlid Reach receivers to their kits to complement their existing equipment. Here’s a recording from the event.


The affordability, simple interface, robustness and ability to integrate with other equipment have made units such as the Emlid Reach RS2+ an increasingly common piece of hardware on survey projects.

Key presenters for this webinar included:

  • Igor Vereninov, Co-Owner of Emlid
  • Alistair Hart, General Manager of Mangoesmapping
  • Surveyors using Emlid equipment on projects across Australia (TBA)

Whether your current GNSS equipment consists of Trimble, Leica, Topcon or other hardware  – there is plenty of value to be had by adding Emlid GNSS receivers to your fleet.

We’ll take a look at the latest features available from the Emlid Reach receiver range and meet some surveyors from around Australia who have already implemented Emlid gear into their GNSS workflows.

Emlid GNSS versatility Webinar (PDF)


You will be redirected to the Map Gear Online Store in 5 seconds...