6 Handy Videos for Setting Up an Emlid GNSS Base Station

Getting your Emlid GNSS base station setup right is key to achieving survey-grade accuracy. In this post, we share six short instructional videos showing how to configure your Emlid RS2+, RS3, or RS4 as a base station for reliable RTK corrections — trusted by surveyors and construction professionals across Australia and New Zealand.

Here are a few instructional videos to get you started!
https://bit.ly/466l2FJ

– Setting up a Base Station Over a Known Point

–  Placing a base over a known point

A concise video to show proper setup, apply a base shift and maintain accuracy with rover measurements

– Averaging base position in FIX

Average your base’s position in FIX using the Emlid Flow app and an NTRIP service. This method is perfect when working in areas with good Internet coverage.

– Getting base coordinates using static data

Use an online post-processing services such as AUSPOS.

– Getting base position from post-processing services

Record static data on your base and post-process it in Emlid Studio.

– Use Base Shift

Your PSM is in the wrong spot? Base shift can get your base where you need it, for example in an elevated location.

All these video on one handy playlist!
https://bit.ly/466l2FJ